4. B modeling#
4.1. Characteristics of modeling#
It is the same modeling as modeling A, but with plane constraints.
4.2. Characteristics of the mesh#
The mesh is the same as that of modeling A.
4.3. Tested sizes and results#
The quantities tested are identical to those described in modeling A. The staircase deformation in FIG. 3.4-a is obtained.
Identification |
Reference |
SOMM_ABSpour DX- \(\text{Depl\_X}\) (master side) |
0 |
SOMM_ABSpour DY- \(\text{Depl\_Y}\) (master side) |
0 |
SOMM_ABSpour DX- \(\text{Depl\_X}\) (slave side) |
0 |
SOMM_ABS for DY- \(\text{Depl\_Y}\) (slave side) |
0 |
Table 4.3-1
We test the value of \({E}^{e}\) produced by the POST_ERREUR operator.
Identification |
Reference type |
Reference value |
Tolerance |
Ee |
“ANALYTIQUE” |
2.6 107 |
|
We test the value of \({\parallel u\parallel }_{{L}^{2}}\) produced by the POST_ERREUR operator.