3. Modeling A#
3.1. Characteristics of modeling#
To avoid rigid body movements, it is mandatory that the movements \(\mathrm{DY}\) of the points \(\mathrm{A1}\) (belonging to the blank) and \(\mathrm{A2}\) (belonging to the punch) be identical.
3.2. Characteristics of the mesh#
Number of knots: 182
Number of meshes: 131 QUAD4, 12 TRIA3 and 84 SEG2
3.3. Tested sizes and results#
Identification (Move) |
Load ( \(\times {10}^{3}N\) ) |
Reference |
Reference type |
Tolerance |
\(\mathrm{DX}\) (\(\mathrm{N87}\)) |
10.6 |
“SOURCE_EXTERNE” |
10.00% |
|
\(\mathrm{DX}\) (\(\mathrm{N87}\)) |
15.4 |
“SOURCE_EXTERNE” |
10.00% |
|
\(\mathrm{DX}\) (\(\mathrm{N87}\)) |
20.0 |
“SOURCE_EXTERNE” |
10.00% |
|
\(\mathrm{DX}\) (\(\mathrm{N87}\)) |
24.7 |
“SOURCE_EXTERNE” |
10.00% |
|
\(\mathrm{DX}\) (\(\mathrm{N87}\)) |
28.2 |
“SOURCE_EXTERNE” |
10.00% |
|
\(\mathrm{DX}\) (\(\mathrm{N87}\)) |
33.0 |
“SOURCE_EXTERNE” |
10.00% |
|
\(\mathrm{DX}\) (\(\mathrm{N87}\)) |
37.4 |
“SOURCE_EXTERNE” |
10.00% |
|
\(\mathrm{DX}\) (\(\mathrm{N87}\)) |
4.0 |
“SOURCE_EXTERNE” |
10.00% |
|
\(\mathrm{DX}\) (\(\mathrm{N87}\)) |
10.6 |
“NON_REGRESSION” |
0.1% |
|
\(\mathrm{DX}\) (\(\mathrm{N87}\)) |
15.4 |
“NON_REGRESSION” |
0.1% |
|
\(\mathrm{DX}\) (\(\mathrm{N87}\)) |
20.0 |
“NON_REGRESSION” |
0.1% |
|
\(\mathrm{DX}\) (\(\mathrm{N87}\)) |
24.7 |
“NON_REGRESSION” |
0.1% |
|
\(\mathrm{DX}\) (\(\mathrm{N87}\)) |
28.2 |
“NON_REGRESSION” |
0.1% |
|
\(\mathrm{DX}\) (\(\mathrm{N87}\)) |
33.0 |
“NON_REGRESSION” |
0.1% |
|
\(\mathrm{DX}\) (\(\mathrm{N87}\)) |
37.4 |
“NON_REGRESSION” |
0.1% |
|
\(\mathrm{DX}\) (\(\mathrm{N87}\)) |
44.0 |
“NON_REGRESSION” |
0.00% |
3.4. notes#
The law of behavior of the material constituting the sheet is given in linearized form.
The calculation no longer converges beyond 75% of the total load.