v6.04.217 SSNV217 - Cube in simple tension and compression with the ENDO_ORTH_BETON law

Summary:

The modeling \(A\) of this test makes it possible to test different possible damage configurations of law ENDO_ORTH_BETON in four steps and to verify the good management of the various mechanisms:

• progressive traction damage in the \(X\) direction until it is blocked

• progressive damage to traction in the \(Y\) direction until it is blocked, in the presence of a blocked damage direction (according to \(X\))

• progressive traction damage in direction \(Z\), in the presence of two blocked damage directions (according to \(X\) and according to \(Y\))

• discharge phase then progressive compression damage according to \(Z\)

• 1. Reference problem
  • 1.1. XZGLADCBEHFYGéométrie
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Benchmark solution
• 2. Modeling A
  • 2.1. Characteristics of modeling A
  • 2.2. Characteristics of the mesh
  • 2.3. Loading description
  • 2.4. Tested sizes and results
• 3. Summary of results