8. Modeling I#

8.1. Characteristics of modeling#

The model tested is 3D. The law of behavior used is law ROUSSELIER (in large SIMO_MIEHE deformations). Control by deformation is validated.

8.2. Characteristics of the mesh#

The mesh is obtained by GIBI. It is composed of 10 HEXA8 elements (only one element in the section)

_images/100000000000033C000001ECA027BEEEFEF4D103.png

8.3. Tested sizes and results#

To validate the solution obtained, the following is tested at serial number 21:

  1. the following displacement \(z\) of the face on which the load is imposed,

  2. the \(\mathit{zz}\) stress as well as the damage value in the weakened mesh

  3. the value of the plasticity indicator in the weakened mesh.

Field name

Component

Location

Tolerance

DEPL

DZ

\(E\)

default

SIEF_ELGA

SIZZ

\(\mathit{M1}\), point 1

defect

VARI_ELGA

V3

\(\mathit{M1}\), point 1

defect