v6.04.112 SSNV112 - Incompressible hollow cylinder (large deformations)

Summary:

This test makes it possible to validate the almost incompressible elements in large deformations, in statics for a three-dimensional, axisymmetric problem or two-dimensional (plane deformations). Consider a subdued hollow cylinder to an internal radial displacement. The material has an equal Poisson’s ratio to 0.4999 and we use the quasiincompressible elements « INCO_UPG » with deformations of « SIMO_MIEHE » and « GDEF_LOG » and the « INCO_UP » elements with the « GDEF_LOG » deformations.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
  • 2.1. Calculation method
  • 2.2. Particularization of the solution
  • 2.3. Reference quantities and results
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
  • 3.4. notes
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested sizes and results
  • 4.4. notes
• 5. C modeling
  • 5.1. Characteristics of modeling
  • 5.2. Characteristics of the mesh
  • 5.3. Tested sizes and results
  • 5.4. notes
• 6. D modeling
  • 6.1. Characteristics of modeling
  • 6.2. Characteristics of the mesh
  • 6.3. Tested sizes and results
  • 6.4. notes
• 7. E modeling
  • 7.1. Characteristics of modeling
  • 7.2. Characteristics of the mesh
  • 7.3. Tested sizes and results
• 8. F modeling
  • 8.1. Characteristics of modeling
  • 8.2. Characteristics of the mesh
  • 8.3. Tested sizes and results
  • 8.4. notes
• 9. G modeling
  • 9.1. Characteristics of modeling
  • 9.2. Characteristics of the mesh
  • 9.3. Tested sizes and results
  • 9.4. notes
• 10. H modeling
  • 10.1. Characteristics of modeling
  • 10.2. Characteristics of the mesh
  • 10.3. Tested sizes and results
  • 10.4. notes
• 11. Modeling I
  • 11.1. Characteristics of modeling
  • 11.2. Characteristics of the mesh
  • 11.3. Tested sizes and results
  • 11.4. notes
• 12. J modeling
  • 12.1. Characteristics of modeling
  • 12.2. Characteristics of the mesh
  • 12.3. Tested sizes and results
• 13. K modeling
  • 13.1. Characteristics of modeling
  • 13.2. Characteristics of the mesh
  • 13.3. Tested sizes and results
  • 13.4. notes
• 14. L modeling
  • 14.1. Characteristics of modeling
  • 14.2. Characteristics of the mesh
  • 14.3. Tested sizes and results
  • 14.4. notes
• 15. M modeling
  • 15.1. Characteristics of modeling
  • 15.2. Characteristics of the mesh
  • 15.3. Tested sizes and results
  • 15.4. notes
• 16. N modeling
  • 16.1. Characteristics of modeling
  • 16.2. Characteristics of the mesh
  • 16.3. Tested sizes and results
  • 16.4. notes
• 17. O modeling
  • 17.1. Characteristics of modeling
  • 17.2. Characteristics of the mesh
  • 17.3. Tested sizes and results
• 18. Summary of results