4. B modeling#
4.1. Characteristics of modeling#
The crack is not meshed (modeling X- FEM).
We use the hypothesis of Plane Constraints.
The upper part and the lower part of the structure are modeled.
4.2. Test values and B modeling results#
We test the value of the displacement of the node (same node as that tested in modeling A).
Identification |
Test type |
Value |
Precision |
\(\mathit{DY}\) at node \(X\) |
|
-8.64270887097E-01 |
0.16 |
This test is combined with a non-regression test.