8. F modeling#
8.1. Characteristics of modeling#
We use 3D modelling_ INCO_UPG
8.2. Characteristics of the mesh#
The mesh consists of 1058 TETRA10 meshes.
8.3. Tested sizes and results#
The modeling results are tested against the numerical reference solution presented in 2, and also in non-regression.
Location |
Instant |
Component (DEPL) |
VALE_REFE |
Precision |
Aen node \((\mathrm{48,}\mathrm{60,}0.5)\) |
|
DX |
\(-\mathrm{1,61818}\mathit{mm}\) |
6% |
Aen node \((\mathrm{48,}\mathrm{60,}0.5)\) |
|
DY |
\(\mathrm{2,13651}\mathit{mm}\) |
|
Aen node \((\mathrm{48,}\mathrm{60,}0.5)\) |
|
DZ |
\(0\mathit{mm}\) |
0.1% |
Identification |
Component |
Reference Type |
Tolerance |
Aen \((\mathrm{48,}\mathrm{60,}0.5)\) node |
DEPL /DX |
|
|
Aen node \((\mathrm{48,}\mathrm{60,}0.5)\) |
|
|
|
Aen node \((\mathrm{48,}\mathrm{60,}0.5)\) |
|
|
|
Aen node \((\mathrm{48,}\mathrm{60,}0.5)\) |
|
|
|
Cen \((\mathrm{24,}\mathrm{30,}0)\) node |
DEPL /DX |
|
|
Cen node \((\mathrm{24,}\mathrm{30,}0)\) |
|
|
|
Cen node \((\mathrm{24,}\mathrm{30,}0)\) |
|
|
|
Cen node \((\mathrm{24,}\mathrm{30,}0)\) |
|
|
|