v6.03.117 SSNP117 - 2D Rousselier model - DP

Summary:

This nonlinear quasistatic mechanics test makes it possible to validate the Rousselier model by \(\mathrm{2D}\) plane deformations for the following configurations: elastoplastic base model, germination model and viscoplastic model with theta-method for integrating the law of behavior.

The modeling is carried out with a quadratic \(\mathrm{2D}\) element, in plane deformation.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Reference solutions
  • 2.1. Calculation method
  • 2.2. Reference quantities and results
  • 2.3. Uncertainties about the solution
• 3. Modeling A
  • 3.1. Characteristics of the mesh
  • 3.2. Characteristics of modeling
  • 3.3. Tested sizes and results
• 4. B modeling
  • 4.1. Characteristics of the mesh
  • 4.2. Characteristics of modeling
  • 4.3. Tested sizes and results
• 5. C modeling
  • 5.1. Characteristics of the mesh
  • 5.2. Characteristics of modeling
  • 5.3. Tested sizes and results
• 6. D modeling
  • 6.1. Characteristics of modeling
  • 6.2. Tested sizes and results
• 7. Summary of results