6. D modeling

6.1. Characteristics of modeling

Modeling 3D: 1 HEXA20

The imposed load is as follows:

• Face \(\mathrm{S6}\) is blocked in the direction \(y\),

• Face \(\mathrm{S2}\) is blocked in the direction \(x\),

• Face \(\mathrm{S1}\) is blocked in the direction \(z\)

• Face \(\mathrm{S5}\) is moved from \(2\mathrm{mm}\) to \(2000s\), \(0.2s\), or \(0.002s\) in 100 increments.

The law of behavior tested is law VISC_ISOT_LINE.

6.2. Tested sizes and results

The reaction force on face \(\mathrm{S5}\) is tested for the 3 deformation rates for the displacement values: \(\mathrm{0.1mm}\), \(\mathrm{1mm}\) and \(\mathrm{2mm}\).

Movement \(U=0.1\mathrm{mm}\)

Identification	Reference	Aster	\(\text{\%}\) difference
Slow speed	498.936	499.026	0.018
Average speed	556.844	556.945	0.018
Fast speed	632.832	362.948	0.018

Movement \(U=1\mathrm{mm}\)

Identification	Reference	Aster	\(\text{\%}\) difference
Slow speed	433.411	433.422	0.003
Average speed	462.578	462.591	0.003
Fast speed	500.853	500.868	0.003

Movement \(U=2\mathrm{mm}\)

Identification	Reference	Aster	\(\text{\%}\) difference
Slow speed	360.757	360.740	-0.005
Average speed	379.083	379.066	-0.005
Fast speed	403.131	403.113	-0.004