v6.02.122 SSNL122 - Multifiber cantilever beam subjected to stress

Summary:

This test concerns the validation of multifiber beams with modeling in POU_D_TGM.

This problem makes it possible to test:

• linear finite elements such as beams with a modeling in POU_D_TGM,

• taking orientation into account,

• the calculation of SIEF_ELGA and EFGE_ELNO.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
  • 2.1. Reference quantities and results
  • 2.2. Bibliographical reference
• 3. Modeling A
  • 3.1. Characteristics of modeling and meshing
  • 3.2. Fiber numbering
  • 3.3. Tested sizes and results
• 4. Summary of results