v6.02.100 SSNL100 - Laying a line canton with two equal spans

Summary:

This test simulates the operation of installing a cable with two ranges. The cable is fixed at one of its ends, passes over a fixed pulley towards the other end and rests in its middle on a pulley placed at the bottom of a mobile suspension. The deflection of the spans is adjusted by « giving » more or less cable to the fixed pulley.

The interest is to test the cable and cable-pulley elements and their operation in operator STAT_NON_LINE.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Uncertainty about the solution
  • 2.4. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. notes
  • 3.4. Tested sizes and results
• 4. B modeling
  • 4.1. Characteristics of modeling
• 5. Summary of results