v6.01.111 SSNA111 - Indentation of a block with a punch

Summary:

This test concerns the study of a conical punch deforming a massive elasto-plastic structure.

The whole is modelled with axisymmetric elements and subjected to imposed displacement and contact.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Reference solution
  • 2.1. Benchmark results
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Characteristics of behavior
  • 3.4. Contact characteristics
  • 3.5. Tested quantities and results
  • 3.6. notes
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Characteristics of behavior
  • 4.4. Contact characteristics
  • 4.5. Tested quantities and results
  • 4.6. notes
• 5. C modeling
  • 5.1. Characteristics of modeling
  • 5.2. Characteristics of the mesh
  • 5.3. Characteristics of behavior
  • 5.4. Contact characteristics
  • 5.5. Tested quantities and results
  • 5.6. notes
• 6. Summary of results