5. C modeling#
5.1. Characteristics of modeling#
We use a DIS_T model.
The load associated with the system is defined using the AFFE_CHAR_CINE operator.
A further calculation is carried out on the results obtained with a first non-linear mode calculation.
In order not to overload the test case, the stability of the solution is not calculated.
5.2. Characteristics of the mesh#
The mesh contains 1 element of type POI1 and 1 element of type SEG2.
5.3. Tested sizes and results#
The value of the frequency relative to a given energy is tested. This frequency is obtained by interpolation from the table produced by MODE_NON_LINE.
Frequency ( \(\mathit{Hz}\) ) |
Energy ( \(J\) ) |
\(0.64610\) |
|