5. C modeling

5.1. Characteristics of modeling

We use a AXIS_DIAG model.

5.2. Characteristics of the mesh

The mesh contains 100 elements of type QUAD4.

5.3. Tested sizes and results

Identification	Reference type	Reference value	Tolerance
Dot NI - \(\mathrm{TEMP}\)	“SOURCE_EXTERNE”
t=50s		-151.52	2.00%
t=51s		-143.51	2.00%
t=72s		-55.17	0.50%
t=200s		-127.18	0.50%
Point NC - \(\mathrm{TEMP}\)	“SOURCE_EXTERNE”
t=50s		99.85	0.50%
t=72s		88.24	0.50%
t=200s		22.43	1.00%

The values obtained with Code_Aster in version 10.3.18 are tested in “NON_REGRESSION” with an accuracy of \(\text{0,1\%}\).