v4.23.301 TTLP301 - Heat transfer in a perforated plate

Summary:

This industrial test is the result of the independent validation of version 3 in linear transient thermal technology.

It is a 2D plane problem represented by two models, one plane, the other solid.

The features tested are as follows:

• flat thermal element,

• volume thermal element,

• transient thermal algorithm,

• exchange and flow boundary conditions.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Reference quantities and results
  • 2.3. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested sizes and results
• 5. Summary of results