3. Modeling A

3.1. Characteristics of modeling

We use a PLANpuis PLAN_DIAG model.

3.2. Characteristics of the mesh

The mesh consists of a single mesh for each of the following types.

Modelizations	Meshes
PLAN	TRIA3 TRIA6 QUAD4 QUAD8 QUAD9
PLAN_DIAG	TRIA3 QUAD4

3.3. Tested sizes and results

The temperature is tested at \(t\mathrm{=}1\) at any node in the element.

The solution conforms to the analytical value at less than 0.1%.