Modeling A
==============


Characteristics of modeling
-----------------------------------

We use a PLANpuis PLAN_DIAG model.


Characteristics of the mesh
----------------------------

The mesh consists of a single mesh for each of the following types.


.. csv-table::

    "Modelizations", "Meshes"
    "PLAN "," TRIA3 TRIA6 QUAD4 QUAD8 QUAD9"
    "PLAN_DIAG "," TRIA3 QUAD4"



Tested sizes and results
------------------------------

The temperature is tested at :math:`t\mathrm{=}1` at any node in the element.

The solution conforms to the analytical value at less than 0.1%.