v4.05.302 TPLP302 - Rectangular plate with imposed temperature

Summary:

This test is the result of the independent validation of version 3 in linear stationary heat.

This is a 2D plane problem represented by shell modeling.

The features tested are as follows:

• shell thermal element,

• limit conditions: imposed temperature.

The results are compared with an analytical solution.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Uncertainty about the solution
  • 2.4. References
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. notes
  • 3.4. Tested sizes and results
• 4. Summary of results