v4.05.001 TPLP01 - L-shaped domain with geometric singularity

Summary:

This test is the result of the independent validation of version 3 in linear stationary heat.

It is a 2D plane problem with two models, one plane, the second volume.

The objective is to validate, in the presence of a geometric singularity, the plane and 3D thermal elements with the limiting condition of an imposed temperature.

The results are compared with those provided by VPCS.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Reference solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Uncertainty about the solution
  • 2.4. References
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested sizes and results
• 5. Summary of results