v4.04.101 TPLV101 - Stationary thermal with exchange condition between walls facing each other

Summary:

This elementary test makes it possible to treat a stationary thermal problem involving two separate domains by imposing a boundary condition such as exchange between walls.

For the models presented here, the results obtained by*Code_Aster* are identical to the reference calculated analytically.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Reference solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Uncertainty about the solution
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Boundary conditions and loads
  • 3.3. Characteristics of the mesh
  • 3.4. Tested values
  • 3.5. notes
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested values
  • 4.4. notes
• 5. C modeling
  • 5.1. Characteristics of modeling
  • 5.2. Boundary conditions and loads
  • 5.3. Characteristics of the mesh
  • 5.4. Tested values
• 6. Summaries of results