5. C modeling#
5.1. Characteristics of modeling#
The modeling is the same as that of modeling A.
5.2. Boundary conditions and loads#
Outgoing flow through wall \({B}_{1}{C}_{1}\) identical to inflow through wall \({A}_{2}{D}_{2}\) |
|
Temperature imposed in \({A}_{1}\) Temperature imposed in \({B}_{2}\) |
\(T=4.5°C\) |
Normal flow imposed on the wall \({B}_{2}{C}_{2}\) Normal flow imposed on plans \({C}_{1}{D}_{1}\) and \({C}_{2}{D}_{2}\) |
\(\varphi =\mathrm{6.W}/{m}^{2}\) |
Source imposed in domain 1 Source imposed in field 2 |
\({s}_{1}\) \({s}_{2}\) |
5.3. Characteristics of the mesh#
6 QUAD8
36 knots
5.4. Tested values#
Identification Temperature |
Reference |
node N2 (B1) |
1.00 |
node N3 |
2.00 |
node N6 |
1.25 |
node N11 |
3.25 |
node N9 |
5.00 |
node N16 |
7.25 |
node N14 (C1) |
10.00 |
node N19 (A2) |
2.00 |
node N22 |
3.00 |
node N26 |
2.25 |
node N31 |
4.25 |
node N28 |
6.00 |
node N36 |
8.25 |
node N33 (D2) |
11.00 |