v4.04.100 TPLV100 - Cylinder subject to non-axisymmetric boundary conditions

Summary:

It is a stationary thermal test with Fourier modeling.

This test validates all thermal Fourier elements (5 different models) with different types of boundary conditions: imposed temperature, exchange, imposed flow, heat source.

The advantage of the test, in addition to the validation of Fourier thermal, lies in the following points:

• comparison of the results with an analytical solution on various Fourier harmonics (1, 2 and 3),

• homogeneity of the elements between them.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. notes
  • 3.4. Tested values
  • 3.5. notes
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. notes
  • 4.4. Tested values
  • 4.5. notes
• 5. C modeling
  • 5.1. Characteristics of modeling
  • 5.2. Characteristics of the mesh
  • 5.3. notes
  • 5.4. Tested values
  • 5.5. notes
• 6. D modeling
  • 6.1. Characteristics of modeling
  • 6.2. Characteristics of the mesh
  • 6.3. notes
  • 6.4. Tested values
  • 6.5. notes
• 7. E modeling
  • 7.1. Characteristics of modeling
  • 7.2. Characteristics of the mesh
  • 7.3. notes
  • 7.4. Tested values
  • 7.5. notes
• 8. Summary of results