v4.02.100 TPLL100 - Anisotropic flat wall in stationary thermal

Summary:

This test, which concerns stationary and transient linear thermics, aims to validate Cartesian anisotropy.

Two models are carried out:

• a first in volume,

• a second in plan.

The results obtained are in perfect agreement with the analytical values.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested values
  • 3.4. notes
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested values
  • 4.4. notes
• 5. Summary of results