v4.01.301 TPLA301 - Temperature distribution in a short cylinder

Summary:

This test is the result of the independent validation of version 3 in linear stationary heat.

The objective of the 2D axisymmetric problem is to validate axisymmetric thermal elements under imposed temperature in the case of a short cylinder with radial and axial behavior.

It includes a single modeling (axisymmetric).

The results are compared with a solution based on a graphical estimate.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Uncertainty about the solution
  • 2.4. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. notes
  • 3.4. Tested sizes and results
• 4. Summary of results