v4.01.006 TPLA06 - Cylindrical bar with convection

Summary:

This test is the result of the independent validation of version 3 in linear stationary heat.

This is an axisymmetric 2D problem represented by two models, the first using solid elements, the second using axisymmetric 2D elements.

Boundary conditions in terms of imposed temperature and convection are taken into account.

The results from this test case are compared with those provided by VPCS.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Uncertainty about the solution
  • 2.4. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
  • 3.4. notes
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested sizes and results
  • 4.4. notes
• 5. Summary of results