3. Modeling A#
3.1. Characteristics of modeling#
We use a:
3D modeling and POU_D_E for the beam,
A DIS_TRde element type POIau point C,
3D connection_ POUau point ATo connect the beam and the volume face,
3D connection_ POUau point C to connect the DIS_TRet element to the volume face.
3.2. Characteristics of the mesh#
The mesh contains 212 knots and 107 meshes including:
2 SEG2
24 SEG3
54 QUAD8,
27 HEXA20.
3.3. Tested sizes and results#
Travel
Identification |
Reference type |
Reference value |
Tolerance \(\text{(\%)}\) |
|
Point |
Size |
|||
\(B\) |
\(\mathit{DX}\) |
“ANALYTIQUE” |
\(8.3333\mathrm{\times }{10}^{\mathrm{-}5}m\) |
\(0.0001\) |
\(\mathit{DY}\) |
“ANALYTIQUE” |
\(1.6667\mathrm{\times }{10}^{\mathrm{-}4}m\) |
\(0.0001\) |
|
\(\mathit{DZ}\) |
“ANALYTIQUE” |
\(\mathrm{-}2.5\mathrm{\times }{10}^{\mathrm{-}4}m\) |
\(0.0001\) |
|
Constraints
Identification |
Reference type |
Reference value |
Tolerance \(\text{(\%)}\) |
|
Point |
Size |
|||
\(\mathit{C1}(5.0\mathrm{,1}.5,\mathrm{-}1.0)\) |
\(\mathit{SIXX}\) |
“ANALYTIQUE” |
\(\mathrm{-}0.3333N\mathrm{/}{m}^{2}\) |
\(0.0001\) |
\(\mathit{C2}(5.0\mathrm{,1}.5\mathrm{,1}.0)\) |
\(\mathit{SIXX}\) |
“ANALYTIQUE” |
\(1.6667N\mathrm{/}{m}^{2}\) |
\(0.0001\) |
Natural frequencies
Mode |
Reference type |
Reference value |
Tolerance \(\text{(\%)}\) |
\(1\) |
“ANALYTIQUE” |
\(0.014449\) |
|
\(2\) |
“ANALYTIQUE” |
\(0.090529\) |
|