4. Modeling B: « cylinder » crack#
This modeling tests the « cylinder » shaped crack.
4.1. Characteristics of the mesh#
The mesh is identical to that of modeling A.
4.2. Tested sizes and results#
The test focuses on the value of \(\mathit{lsn}\) and \(\mathrm{lst}\) at points \(\mathrm{P4}\) and \(\mathrm{P5}\).
Identification |
Reference type |
Reference value |
Tolerance |
\(\mathit{lsn}(\mathit{P4})\) |
“ANALYTIQUE” |
0.914214 |
10-12 |
\(\mathit{lsn}(\mathit{P5})\) |
“ANALYTIQUE” |
0.5 |
10-12 |
\(\mathrm{lst}(\mathrm{P4})\) |
“ANALYTIQUE” |
-0.5 |
10-12 |
\(\mathrm{lst}(\mathrm{P5})\) |
“ANALYTIQUE” |
-0.5 |
10-12 |