v3.04.315 SSLV315 — Non-planar propagation of an through crack with X- FEM

Summary:

The aim of this test is to compare the propagation methods SIMPLEXE, MAILLAGE, UPWIND and GEOMETRIQUE of the PROPA_FISS operator for an \(\mathrm{3D}\) crack stressed in mixed mode.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested sizes and results
• 5. C modeling
  • 5.1. Characteristics of modeling
  • 5.2. Characteristics of the mesh
  • 5.3. Tested sizes and results
• 6. D modeling
  • 6.1. Characteristics of modeling
  • 6.2. Characteristics of the mesh
  • 6.3. Tested sizes and results
• 7. Modeling E
  • 7.1. Characteristics of modeling
  • 7.2. Characteristics of the mesh
  • 7.3. Tested sizes and results
• 8. G modeling
  • 8.1. Characteristics of modeling
  • 8.2. Characteristics of the mesh
  • 8.3. Tested sizes and results
• 9. H modeling
  • 9.1. Characteristics of modeling
  • 9.2. Characteristics of the mesh
  • 9.3. Tested sizes and results
• 10. Modeling I
  • 10.1. Characteristics of modeling
  • 10.2. Characteristics of the mesh
  • 10.3. Tested sizes and results
• 11. J modeling
  • 11.1. Characteristics of modeling
  • 11.2. Characteristics of the mesh
  • 11.3. Tested sizes and results
• 12. Summary of results