v3.04.307 SSLV307 - Oblique cylinder under uniform axial load

Summary:

The purpose of the test is to validate the various types of linear relationships, defined by the keywords LIAISON_DDL, LIAISON_OBLIQUE, LIAISON_GROUP.

It also makes it possible to test the « cyclic symmetries » option based on the modeling of a sector of the cylinder.

The analysis is carried out in 3D.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Uncertainty about the solution
  • 2.4. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested values
  • 3.4. notes