v3.04.159 SSLV159 - Cantilever girder subject to static boom loading

Summary:

This test makes it possible to validate the connection between 1D and 3D models, in the Arlequin framework (3D_ POU_ARLEQUIN) [1].

It is a cantilever beam model, embedded at one end and subject to static boom loading at the other end.

The results of the calculations are compared with those obtained by CODE_aster with a 1D reference model and a 1D-3D mixed model connected with the 3D_ POU option. The results coincide perfectly with the reference solutions.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested sizes and results
• 5. C modeling
  • 5.1. Characteristics of modeling
  • 5.2. Characteristics of the mesh
  • 5.3. Tested sizes and results
• 6. Summary of results