v3.04.156 FORMA07 - Practical work from the « Advanced use » training: circular crack in an infinite environment

Summary:

This test \(\mathrm{3D}\), in semi-statics, is part of the validation of post-treatments in the mechanics of linear elastic rupture. The structure comprising a circular crack is put into tension.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
  • 2.1. Method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Bibliographical references
• 3. Modeling A: FEM 3D
  • 3.1. Workflow of the TP
  • 3.2. Tested sizes and results
• 4. B modeling: X- FEM 3D
  • 4.1. Workflow of the TP
  • 4.2. Tested sizes and results