v3.03.146 SSLS146 - Calculation of reinforcement on a gantry

Summary:

The objective of this test is to validate the macro command COMBINAISON_FERRAILLAGE, which allows the calculation of the dimensioning reinforcement density and the identification of associated load cases. The calculation is carried out on a portico composed of a slab (plate) resting on four posts.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Calculation method
  • 2.2. Reference quantities and results
  • 2.3. Uncertainty about the solution
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. Summary of results