v3.03.144 SSLS144 - Internal pressure cylinder

Summary:

This test validates modeling COQUE_AXIS (supported by SEG3 meshes). A static calculation is carried out on a cylindrical tank under internal pressure. The model is axisymmetric. The pressure distribution on the inner wall of the tank is not uniform. The generalized movements and efforts obtained are compared to an analytical reference solution.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Reference solution
  • 2.1. Calculation method
  • 2.2. Reference quantities and results
  • 2.3. Bibliographical references
  • 2.4. Uncertainty about the solution
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. Summary of results