3. Modeling A#
3.1. Characteristics of modeling A#
The mesh of the plate is composed of two parts:
\(\mathrm{P1}\), made up of a non-eccentric mesh
\(\mathrm{P2}\), made up of two superimposed meshes:
\(\mathrm{PLAQ}\text{\_}\mathrm{P1S}\) offset from \(\mathrm{0.015m}\)
\(\mathrm{PLAQ}\text{\_}\mathrm{P1I}\) offset from \(-\mathrm{0.035m}\)
Modeling DKT:
Number of nodes |
\(26\) |
|||
Number of stitches |
\(39\) |
That is: |
SEG2 |
|
TRIA3 |
|
Node group:
\(A,B,C,D,E,F,G,H\)
Mesh group:
\(\mathrm{PLAQUE}\): surface \(\mathrm{ACDF}\)
\(\mathrm{PLAQ}\text{\_}\mathrm{P1}\): surface \(\mathrm{BCDE}\)
\(\mathrm{PLAQ}\text{\_}\mathrm{P2}\): surface \(\mathrm{ABEF}\)
\(\mathrm{CD}\): segment \(\mathrm{CD}\)
\(\mathrm{FA}\): segment \(\mathrm{FA}\)
\(\mathrm{BE}\): segment \(\mathrm{BE}\)
3.2. Result of modeling A#
Point |
Maille |
node |
Component |
Reference |
Tolerance \((\text{\%})\) |
\(B\) |
\(\mathrm{N1}\) |
\(\mathrm{DZ}\) |
\(0.3515625m\) |
\(1.\) |
|
\(\mathrm{N1}\) |
\(\mathrm{DRZ}\) |
\(0.\) |
\(0.1\) |
||
\(\mathrm{M19}\) |
\(\mathrm{N1}\) |
\(\mathrm{MXX}\) |
\(-500000.\mathrm{m.N}\) |
\(3.\) |
|
\(\mathrm{M20}\) |
\(\mathrm{N1}\) |
\(\mathrm{MXX}\) |
\(-500000.\mathrm{m.N}\) |
\(5.\) |
|
\(G\) |
\(\mathrm{N22}\) |
\(\mathrm{DZ}\) |
\(-0.2629743m\) |
\(1.\) |
|
\(\mathrm{N22}\) |
\(\mathrm{DRZ}\) |
\(0.\) |
\(0.1\) |