v3.03.007 SSLS07 - Thin cylinder under uniform axial load

Summary:

This test from guide VPCS (SSLS 07/89) aims to validate a loading line (FORCE_POUTRE) in axisymmetric modeling.

For this purpose, we will use the 2 commands: AFFE_CHAR_MECA (modeling A) and AFFE_CHAR_MECA_F (modeling B).

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Uncertainty about the solution
  • 2.4. Bibliographical reference
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested values
  • 3.4. note
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested values
• 5. Summary of results