4. B modeling#
4.1. Characteristics of modeling#
The characteristics are identical to the reference solution. The modeling is of type, formulation DIL_INCO.
4.2. Characteristics of the mesh#
Number of knots 8
Number of SEG3 4
Number of QUAD8 2
Number of group of elements 6
4.3. Tested sizes and results#
Tested value |
Instant |
Node |
Reference |
Criterion |
Aster |
Tolerance |
|
Displacement GONF |
1.0 |
|
“ANALYTIQUE” |
RELATIF |
-0.10 |
0.010 |
|
DX displacement |
1.0 |
|
“ANALYTIQUE” |
RELATIF |
0.0250 |
0.010 |
|
Reaction force SIG1 |
1.0 |
“ANALYTIQUE” |
RELATIF |
1.5 |
0.010 |
4.4. notes#
In order to validate the resolution option RIGI_MECA_ELAS of STAT_NON_LINE, a calculation identical to the first one (option MATRICE = TANGENTE) is carried out by imposing this resolution option. The results are exactly the same as those obtained with the first calculation option, which are presented in the results table above.