2. Modeling A#
2.1. Characteristics of modeling#
Elements POU_D_T, DIS_T, and DIS_TR.
2.2. Characteristics of the mesh#
Number of nodes |
Number of elements |
33 |
32 |
Table 2.2-1
2.3. Tested sizes and results#
Point |
Quantity and Unit |
Value AFNOR |
Value |
Pipestress Value |
Value Aster |
Difference Aster- AFNOR (%) |
50 |
M-Bending moment (N.m) |
5 759 |
5 759 |
5 738 |
5 737.80615250 |
3.680127E-01 |
50 |
v-arrow (mm) |
-6.844 |
-6.844 |
-6.84012309182 |
0.1 (*) |
|
5 |
v-arrow (mm) |
-7.854 |
-7.854 |
-7.836 |
-7.836842498 |
2.244918E-01 |
5 |
|
-0.000706 |
-0.000706 |
-0.00069007950 |
2.255028E+00 |
Table 2.3-1
(*): the value of the difference of 0.1% being the default value for verification by the operator TEST_RESU is indicated when the actual difference is smaller than the default value.
2.4. Displacement#
Figure 2.4-1: Displacement along DY (m)
Figure 2.4-2: Next move DRZ (rad)