Modeling A
==============

Characteristics of modeling
-----------------------------------

Elements POU_D_T, DIS_T, and DIS_TR.


Characteristics of the mesh
----------------------------


.. csv-table::

    "Number of nodes", "Number of elements"
    "33", "32"


Table 2.2-1


Tested sizes and results
------------------------------


.. csv-table::

    "Point", "Quantity and Unit", "Value AFNOR ", "Value ", "Pipestress Value", "Value Aster", "Difference
    Aster- AFNOR
    (%)"
    "50", "M-Bending moment (N.m)", "5 759", "5 759", "5 738", "5 737.80615250", "3.680127E-01"
    "50", "v-arrow (mm)", "-6.844", "-6.844", "-6.84012309182", "0.1 (*)"
    "5", "v-arrow (mm)", "-7.854", "-7.854", "-7.836", "-7.836842498", "2.244918E-01"
    "5"," :math:`\mathrm{\theta }` -rotation (rad)", "-0.000706", "-0.000706", "-0.00069007950", "2.255028E+00"


Table 2.3-1

(*): the value of the difference of 0.1% being the default value for verification by the operator TEST_RESU is indicated when the actual difference is smaller than the default value.


Displacement
-----------


.. image:: images/10000201000002E300000194043399FD30B886A1.png
    :width: 6.548in
    :height: 3.5799in


.. _RefImage_10000201000002E300000194043399FD30B886A1.png:

**Figure** 2.4-1: Displacement along DY (m)


.. image:: images/10000201000002DF00000193A1950E5F3AF95F3B.png
    :width: 6.298in
    :height: 3.4528in


.. _RefImage_10000201000002DF00000193A1950E5F3AF95F3B.png:

**Figure** 2.4-2: Next move DRZ (rad)