5. C modeling#

5.1. Characteristics of modeling#

We use a POU_D_E model. We’re doing an analysis at ELS -QP.

The mesh contains 1 single segment (i.e. 2 nodes), meshed linearly.

C No loading	Configuration considered	Longitudinal reference reinforcement (in cm²)				Reinforcement Transversal (in cm²/ m )
C No loading	Configuration considered	DNS Y I	DNS Y S	DNS Z I	DNS Z S	DNS T
1	1	0	0	0	0	3.42
	2	0	0	0	0	3.42
	3	0	0	0	0	3.42
	4	0	0	0	0	15.38
2	1	22.62	22.62	18.57	18.57	12.7
	2	22.62	22.62	18.57	18.57	12.7
	3	22.62	22.62	18.57	18.57	12.7
	4	22.62	22.62	18.57	18.57	57.14
3	1	22.62	22.62	18.57	18.57	15.82
	2	22.62	22.62	18.57	18.57	15.82
	3	22.62	22.62	18.57	18.57	15.82
	4	22.62	22.62	18.57	18.57	64.18
4	1	17	0	0	0	0
	2	17	0	0	0	0
	3	16.59	12.44	0	0	0
	4	17	0	0	0	0
5	1	0	0	0	22.52	0
	2	0	0	0	22.52	0
	3	0	0	17.59	22.58	0
	4	0	0	0	22.52	0
6	1	0	18.79	0	0	0
	2	0	18.79	0	0	0
	3	14.86	18.33	0	0	0
	4	0	18.79	0	0	0
7	1	0	0	0	24.77	0
	2	0	0	0	24.77	0
	3	0	0	19.98	24.71	0
	4	0	0	0	24.77	0
8	1	47.72	77.55	0	0	0
	2	47.72	77.55	0	0	0
	3	62.04	63.99	0	0	0
	4	47.72	77.55	0	0	0
9	1	-1	-1	-1	-1	-1
	2	-1	-1	-1	-1	-1
	3	-1	-1	-1	-1	-1
	4	-1	-1	-1	-1	-1
10	1	-1	-1	-1	-1	-1
	2	8.85	61.13	132.15	0	0
	3	-1	-1	-1	-1	-1
	4	-1	-1	-1	-1	-1
11	1	0	21.2	0	0	0
	2	0	21.2	0	0	0
	3	16.92	21.09	0	0	0
	4	0	21.2	0	0	0
12	1	0	62.39	0	0	0
	2	4.64	33.73	0	0	0
	3	29.3	32.56	0	0	0
	4	0	62.39	0	0	0
13	1	-1	-1	-1	-1	-1
	2	20.28	44.21	0	0	0
	3	41.23	44.15	0	0	0
	4	-1	-1	-1	-1	-1
14	1	-1	-1	-1	-1	-1
	2	6.94	83.53	0	0	1.93
	3	95.59	100.2	0	0	1.93
	4	-1	-1	-1	-1	-1