v3.01.005 SSLL05 — bimetal: embedded beams connected by a dimensionally stable element

Summary:

The static linear elasticity test is used to validate straight beam elements POU_D_T.

This test case concerns embedded beams connected by a non-deformable element.

The support reactions and bending moments as well as the deflection are tested by comparing simulation results with the reference solution AFNOR (ref. [1]) as well as those obtained with the Pipestress software.

• 1. Reference problem
  • 1.1. Loading
  • 1.2. Liaisons
  • 1.3. Geometry
  • 1.4. Material properties
  • 1.5. Bibliographical references
• 2. Modeling A
  • 2.1. Characteristics of modeling
  • 2.2. Characteristics of the mesh
  • 2.3. Tested sizes and results
  • 2.4. Displacement
• 3. Summary of results