7. E modeling

7.1. Characteristics of modeling

D_ elements PLAN (TRIA3 + QUAD4)

Boundary conditions:

Node names:

\(A=\mathrm{N1}\)

\(B=\mathrm{N119}\)

\(C=\mathrm{N36}\)

\(D=\mathrm{N166}\)

\(E=\mathrm{N41}\)

\(F=\mathrm{N171}\)

7.2. Characteristics of the mesh

Number of knots: 171

Number of meshes and types: 200 TRIA350 QUAD4

7.3. Tested sizes and results

Location	Sizes	Reference	Aster	% difference	tolerance
A		7.398 10—3 —1. 1.685 0.20055 0.	7.3243 10—3 eps —0.8790 1.6241 0.2235 —0.0922	—0.21 12.10 —2.66 11.44 -	10—2 0.15 0.15 0.15 0.15
C		6.78109 10—3 2.80882 10—3 —0.60921 1.27771 0.20055 —0.94346	6.7670 10—3 2.8012 10—3 —0.5122 1.3302 0.2454 —0.8567	—0.21 —0.27 —15.92 4.11 22.36 —9.19	10—2 0.3 0.3 0.3 0.3
E		5.19002 10—3 5.19002 10—3 0.33425 0.33425 0.20055 —1.33425	5.1784 10—3 5.1784 10—3 0.4318 0.5315 0.2890 —1.2686	—0.22 —0.22 29.18 59.18 59.01 44.10 4.92	10—2 0.6 0.6 0.6 0.6
B		4.6716 10—3 0.66738 0.20021 0.	4.6641 10—3 eps —1.3198 10—2 0.6723 0.1977 —0.0219	—0.16 0.74 —1.25 -	10—2 0.05 0.05 0.05 0.05
D		4.32523 10—3 1.79157 10—3 0.09774 0.56964 0.20021 —0.23595	4.3084 10—3 1.7854 10—3 0.07393 0.5728 0.1940 —0.2347	—0.39 —0.39 —24.36 0.36 0.55 —3.10 0.53	10—2 0.3 0.3 0.3 0.3
F		3.31039 10—3 3.31039 10—3 0.33369 0.33369 0.20021 —0.33369	3.2974 10—3 3.2974 10—3 0.2976 0.3245 0.1866 —0.3415	—0.39 —0.39 —10.81 —10.81 —2.81 —2.81 —2.81 —2.34	10—2 0.15 0.15 0.15 0.15

7.4. notes

The mesh is insufficient for linear elements.