v2.04.402 SDLV402 - Dynamic substructuring: incompatible mesh and mode

Summary:

The objective of this test case is to calculate the natural frequencies of two coupled tiles. With this in mind, mesh incompatibility functionalities in dynamic substructuring are tested, as well as coupling by interface mode.

The test case is composed of a \(\mathrm{3D}\) model, of each of the tiles.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Elastic properties of materials
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
  • 2.1. Baseline calculation
  • 2.2. Reference quantities and results
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Tested sizes and results
• 4. Summary of results