v2.03.201 SDLP201 — Use of the CALM method for modeling the propagation of a compression wave in an elastic bar

Summary:

This test compares the absorption efficiency of absorbent boundary elements in a compression wave propagation framework in an elastic bar with the CALM [bia1] _ method.

• 1. Caughey Absorbing Layer Method: an absorbent diaper method
• 2. Reference problem
  • 2.1. Geometry
  • 2.2. Material properties
  • 2.3. Modeling and boundary conditions
  • 2.4. Loading
  • 2.5. The modeling of layer CALM
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Tested sizes and results
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Tested sizes and results
• 5. C modeling
  • 5.1. Characteristics of modeling
  • 5.2. Tested sizes and results
• 6. D modeling
  • 6.1. Characteristics of modeling
  • 6.2. Tested sizes and results
• 7. E modeling
  • 7.1. Characteristics of modeling
  • 7.2. Tested sizes and results
• 8. F modeling
  • 8.1. Characteristics of modeling
  • 8.2. Tested sizes and results
• 9. Analysis of the results
• 10. Bibliography