4. B modeling

4.1. Characteristics of modeling A

Modeling DIS_TR.

4.2. Characteristics of the mesh

Number of knots: 1

Number of meshes and type: 1 POI1

4.3. Tested sizes and results

OPTION = “BANDE”

Identification	Reference Value	Reference Type	Tolerance (%)
Fashion 1	\(0.636619\)	“ANALYTIQUE”	\(0.003\)
Mode 2	\(0.675237\)	“ANALYTIQUE”	\(0.003\)
Mode 3	\(0.675237\)	“ANALYTIQUE”	\(0.003\)
Mode 4	\(1.800633\)	“ANALYTIQUE”	\(0.003\)
Fashion 5	\(1.800633\)	“ANALYTIQUE”	\(0.003\)
Fashion 6	\(2.228169\)	“ANALYTIQUE”	\(0.003\)

OPTION = “CENTRE”

Identification	Reference Value	Reference Type	Tolerance (%)
Fashion 1	\(0.636619\)	“ANALYTIQUE”	\(0.003\)
Mode 2	\(0.675237\)	“ANALYTIQUE”	\(0.003\)
Mode 3	\(0.675237\)	“ANALYTIQUE”	\(0.003\)
Mode 4	\(1.800633\)	“ANALYTIQUE”	\(0.003\)
Fashion 5	\(1.800633\)	“ANALYTIQUE”	\(0.003\)
Fashion 6	\(2.228169\)	“ANALYTIQUE”	\(0.003\)

OPTION = “PLUS_PETITE”

Identification	Reference Value	Reference Type	Tolerance (%)
Fashion 1	\(0.636619\)	“ANALYTIQUE”	\(0.003\)
Mode 2	\(0.675237\)	“ANALYTIQUE”	\(0.003\)
Mode 3	\(0.675237\)	“ANALYTIQUE”	\(0.003\)
Mode 4	\(1.800633\)	“ANALYTIQUE”	\(0.003\)
Fashion 5	\(1.800633\)	“ANALYTIQUE”	\(0.003\)
Fashion 6	\(2.228169\)	“ANALYTIQUE”	\(0.003\)

METHODE =” JACOBI “and OPTION =” BANDE”

Identification	Reference Value	Reference Type	Tolerance (%)
Fashion 1	\(0.636619\)	“ANALYTIQUE”	\(0.003\)
Mode 2	\(0.675237\)	“ANALYTIQUE”	\(0.003\)
Mode 3	\(0.675237\)	“ANALYTIQUE”	\(0.003\)
Mode 4	\(1.800633\)	“ANALYTIQUE”	\(0.003\)
Fashion 5	\(1.800633\)	“ANALYTIQUE”	\(0.003\)
Fashion 6	\(2.228169\)	“ANALYTIQUE”	\(0.003\)