v1.04.417 PYNL04 — Validation of the CALCUL order with plate and shell elements

Summary:

The purpose of this test is to validate the command CALCUL for the elements DKT and COQUE_3D by comparing with the command STAT_NON_LINE.

• 1. Description
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Comparisons and results
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Comparisons and results
• 5. Synthesis