5. C modeling#

5.1. Characteristics of the mesh#

The mesh consists of multi-layer plate elements and grid elements.

This test allows:

  • to check the position of the sub-points. The position of the sub-points is known.

  • to check the values of SIXX at all sub-points.

The diagram below shows geometry.

_images/10000000000003B3000001AFC96857DB236F26AE.png

5.2. Tested sizes and results#

Contents of file MED using TEST_FICHIER.

_images/10000000000003EA000001DC047D4EAC3C7BA5B3.png