v1.01.368 PLEXU08 - Validating new CALC_EUROPLEXUS features

Summary:

During the redesign of CALC_EUROPLEXUS, new functionalities were added to the macro command. The list of these additions is as follows:

• new law of behavior: VMIS_ISOT_TRAC (modeling A),

• new load: imposed movements (DDL_IMPO) other than blockages (modeling B),

• new modeling: 3D on support meshes HEXA8 and TETRA4. (C and D models)

Other features have also been added since then:

• pressure loading on the faces of 3D elements (PRES_REP/PRES) (E modeling)

• loading FORCE_NODALE (F modeling)

• new modeling: 3D_SI on support mesh HEXA8 (G modeling)

• loading LIAISON_MAIL (H modeling)

The purpose of this test is to validate the proper functioning of these additional functionalities.

• 1. Modeling A
  • 1.1. But
  • 1.2. Description
  • 1.3. Principle of validation
  • 1.4. Tested values
• 2. B modeling
  • 2.1. But
  • 2.2. Description
  • 2.3. Principle of validation
  • 2.4. Tested values
• 3. C modeling
  • 3.1. But
  • 3.2. Description
  • 3.3. Principle of validation
  • 3.4. Tested values
• 4. D modeling
  • 4.1. But
  • 4.2. Description
  • 4.3. Principle of validation
  • 4.4. Tested values
• 5. E modeling
  • 5.1. But
  • 5.2. Description
  • 5.3. Principle of validation
  • 5.4. Tested values
• 6. F modeling
  • 6.1. But
  • 6.2. Description
  • 6.3. Principle of validation
  • 6.4. Tested values
• 7. G modeling
  • 7.1. But
  • 7.2. Description
  • 7.3. Principle of validation
  • 7.4. Tested values
• 8. H modeling
  • 8.1. But
  • 8.2. Description
  • 8.3. Principle of validation
  • 8.4. Tested values
• 9. Conclusion