v1.01.330 ZZZZ330 — Validation of the calculation of potential energy for beam elements

Summary:

The objective of this test is to validate the calculation of the potential energy for the following beam elements: POU_D_EM, POU_D_TGetPOU_D_TGM.

The calculation of potential energy is done after a static calculation and a modal calculation.

Note:

Validation is already done elsewhere for the elements POU_D_E and POU_D_T.

• 1. Description
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and change
• 2. Reference solution
  • 2.1. Calculation method
  • 2.2. Reference quantities and results
  • 2.3. Uncertainties about the solution
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested sizes and results
• 5. C modeling
  • 5.1. Characteristics of modeling
  • 5.2. Characteristics of the mesh
  • 5.3. Tested sizes and results
• 6. Summary of results