v1.01.286 ZZZZ286 — Validation of the displacement imposed on an edge

Summary

The purpose of this test is to validate the assignment of a displacement-type load on an edge of a structure. It allows you to qualify the ARETE_IMPO keyword from the AFFE_CHAR_MECA operator.

The displacements at certain nodes of the mesh are tested depending on whether the structure has been subjected to a loading produced by ARETE_IMPO or by an equivalent load.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. Summary of results