v1.01.268 ZZZZ268 - Validation of POST_BORDET in 2D and 3D

Summary:

This test validates the calculation of the Bordet stress and probability, in two dimensions and three dimensions, with thermal evolution, on cases in which the mechanical fields are uniform (which allows an analytical calculation of these quantities); this test case is intended to test numerical developments and not to carry out a realistic case study.

• 1. Reference problem
  • 1.1. Modeling geometry A
  • 1.2. Modeling geometry B
  • 1.3. Material properties
  • 1.4. Boundary conditions and loads
• 2. Benchmark solution
  • 2.1. Calculation method
  • 2.2. Reference quantities and results
  • 2.3. Uncertainties about the solution
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested sizes and results
• 5. Summary of results